Optimization of processing parameters for pulsed laser welding of dissimilar metal interconnects

본 논문은 독자의 편의를 위해 기계번역된 내용이어서 자세한 내용은 원문을 참고하시기 바랍니다.

NguyenThi TienaYu-LungLoabM.Mohsin RazaaCheng-YenChencChi-PinChiuc

aNational Cheng Kung University, Department of Mechanical Engineering, Tainan, Taiwan

bNational Cheng Kung University, Academy of Innovative Semiconductor and Sustainable Manufacturing, Tainan, Taiwan

cJum-bo Co., Ltd, Xinshi District, Tainan, Taiwan

Abstract

워블 전략이 포함된 펄스 레이저 용접(PLW) 방법을 사용하여 알루미늄 및 구리 이종 랩 조인트의 제조를 위한 최적의 가공 매개변수에 대해 실험 및 수치 조사가 수행됩니다. 피크 레이저 출력과 접선 용접 속도의 대표적인 조합 43개를 선택하기 위해 원형 패킹 설계 알고리즘이 먼저 사용됩니다.

선택한 매개변수는 PLW 프로세스의 전산유체역학(CFD) 모델에 제공되어 용융 풀 형상(즉, 인터페이스 폭 및 침투 깊이) 및 구리 농도를 예측합니다. 시뮬레이션 결과는 설계 공간 내에서 PLW 매개변수의 모든 조합에 대한 용융 풀 형상 및 구리 농도를 예측하기 위해 3개의 대리 모델을 교육하는 데 사용됩니다.

마지막으로, 대체 모델을 사용하여 구성된 처리 맵은 용융 영역에 균열이나 기공이 없고 향상된 기계적 및 전기적 특성이 있는 이종 조인트를 생성하는 PLW 매개변수를 결정하기 위해 세 가지 품질 기준에 따라 필터링됩니다.

제안된 최적화 접근법의 타당성은 최적의 용접 매개변수를 사용하여 생성된 실험 샘플의 전단 강도, 금속간 화합물(IMC) 형성 및 전기 접촉 저항을 평가하여 입증됩니다.

결과는 최적의 매개변수가 1209N의 높은 전단 강도와 86µΩ의 낮은 전기 접촉 저항을 생성함을 확인합니다. 또한 용융 영역에는 균열 및 기공과 같은 결함이 없습니다.

An experimental and numerical investigation is performed into the optimal processing parameters for the fabrication of aluminum and copper dissimilar lap joints using a pulsed laser welding (PLW) method with a wobble strategy. A circle packing design algorithm is first employed to select 43 representative combinations of the peak laser power and tangential welding speed. The selected parameters are then supplied to a computational fluidic dynamics (CFD) model of the PLW process to predict the melt pool geometry (i.e., interface width and penetration depth) and copper concentration. The simulation results are used to train three surrogate models to predict the melt pool geometry and copper concentration for any combination of the PLW parameters within the design space. Finally, the processing maps constructed using the surrogate models are filtered in accordance with three quality criteria to determine the PLW parameters that produce dissimilar joints with no cracks or pores in the fusion zone and enhanced mechanical and electrical properties. The validity of the proposed optimization approach is demonstrated by evaluating the shear strength, intermetallic compound (IMC) formation, and electrical contact resistance of experimental samples produced using the optimal welding parameters. The results confirm that the optimal parameters yield a high shear strength of 1209 N and a low electrical contact resistance of 86 µΩ. Moreover, the fusion zone is free of defects, such as cracks and pores.

Fig. 1. Schematic illustration of Al-Cu lap-joint arrangement
Fig. 1. Schematic illustration of Al-Cu lap-joint arrangement
Fig. 2. Machine setup (MFQS-150W_1500W
Fig. 2. Machine setup (MFQS-150W_1500W
Fig. 5. Lap-shear mechanical tests: (a) experimental setup and specimen dimensions, and (b) two different failures of lap-joint welding.
N. Thi Tien et al.
Fig. 5. Lap-shear mechanical tests: (a) experimental setup and specimen dimensions, and (b) two different failures of lap-joint welding. N. Thi Tien et al.
Fig. 9. Simulation and experimental results for melt pool profile. (a) Simulation results for melt pool cross-section, and (b) OM image of melt pool cross-section.
(Note that laser processing parameter of 830 W and 565 mm/s is chosen.).
Fig. 9. Simulation and experimental results for melt pool profile. (a) Simulation results for melt pool cross-section, and (b) OM image of melt pool cross-section. (Note that laser processing parameter of 830 W and 565 mm/s is chosen.).

References

[1]

G. Santos

Road transport and CO2 emissions: What are the challenges?

Transport Policy, 59 (2017), pp. 71-74

ArticleDownload PDFView Record in ScopusGoogle Scholar[2]

A. Das, D. Li, D. Williams, D. Greenwood

Joining technologies for automotive battery systems manufacturing

World Electric Veh. J., 9 (2) (2018), p. 22 View PDF

CrossRefGoogle Scholar[3]

M. Zwicker, M. Moghadam, W. Zhang, C. Nielsen

Automotive battery pack manufacturing–a review of battery to tab joining

J. Adv. Joining Process., 1 (2020), Article 100017

ArticleDownload PDFView Record in ScopusGoogle Scholar[4]

T. Mai, A. Spowage

Characterisation of dissimilar joints in laser welding of steel–kovar, copper–steel and copper–aluminium

Mater. Sci. Eng. A, 374 (1–2) (2004), pp. 224-233

ArticleDownload PDFView Record in ScopusGoogle Scholar[5]

S.S. Lee, T.H. Kim, S.J. Hu, W.W. Cai, J. Li, J.A. Abell

Characterization of joint quality in ultrasonic welding of battery tabs

International Manufacturing Science and Engineering Conference, vol. 54990, American Society of Mechanical Engineers (2012), pp. 249-261

Google Scholar[6]

Y. Zhou, P. Gorman, W. Tan, K. Ely

Weldability of thin sheet metals during small-scale resistance spot welding using an alternating-current power supply

J. Electron. Mater., 29 (9) (2000), pp. 1090-1099 View PDF

CrossRefView Record in ScopusGoogle Scholar[7]

S. Katayama

Handbook of laser welding technologies

Elsevier (2013)

Google Scholar[8]

A. Sadeghian, N. Iqbal

A review on dissimilar laser welding of steel-copper, steel-aluminum, aluminum-copper, and steel-nickel for electric vehicle battery manufacturing

Opt. Laser Technol., 146 (2022), Article 107595

ArticleDownload PDFView Record in ScopusGoogle Scholar[9]

M.J. Brand, P.A. Schmidt, M.F. Zaeh, A. Jossen

Welding techniques for battery cells and resulting electrical contact resistances

J. Storage Mater., 1 (2015), pp. 7-14

ArticleDownload PDFView Record in ScopusGoogle Scholar[10]

M. Jarwitz, F. Fetzer, R. Weber, T. Graf

Weld seam geometry and electrical resistance of laser-welded, aluminum-copper dissimilar joints produced with spatial beam oscillation

Metals, 8 (7) (2018), p. 510 View PDF

CrossRefView Record in ScopusGoogle Scholar[11]S. Smith, J. Blackburn, M. Gittos, P. de Bono, and P. Hilton, “Welding of dissimilar metallic materials using a scanned laser beam,” in International Congress on Applications of Lasers & Electro-Optics, 2013, vol. 2013, no. 1: Laser Institute of America, pp. 493-502.

Google Scholar[12]

P. Schmitz, J.B. Habedank, M.F. Zaeh

Spike laser welding for the electrical connection of cylindrical lithium-ion batteries

J. Laser Appl., 30 (1) (2018), Article 012004 View PDF

CrossRefView Record in ScopusGoogle Scholar[13]

P. Kah, C. Vimalraj, J. Martikainen, R. Suoranta

Factors influencing Al-Cu weld properties by intermetallic compound formation

Int. J. Mech. Mater. Eng., 10 (1) (2015), pp. 1-13

Google Scholar[14]

Z. Lei, X. Zhang, J. Liu, P. Li

Interfacial microstructure and reaction mechanism with various weld fillers on laser welding-brazing of Al/Cu lap joint

J. Manuf. Process., 67 (2021), pp. 226-240

ArticleDownload PDFView Record in ScopusGoogle Scholar[15]

T. Solchenbach, P. Plapper

Mechanical characteristics of laser braze-welded aluminium–copper connections

Opt. Laser Technol., 54 (2013), pp. 249-256

ArticleDownload PDFView Record in ScopusGoogle Scholar[16]

T. Solchenbach, P. Plapper, W. Cai

Electrical performance of laser braze-welded aluminum–copper interconnects

J. Manuf. Process., 16 (2) (2014), pp. 183-189

ArticleDownload PDFView Record in ScopusGoogle Scholar[17]

S.J. Lee, H. Nakamura, Y. Kawahito, S. Katayama

Effect of welding speed on microstructural and mechanical properties of laser lap weld joints in dissimilar Al and Cu sheets

Sci. Technol. Weld. Join., 19 (2) (2014), pp. 111-118

Google Scholar[18]

Z. Xue, S. Hu, D. Zuo, W. Cai, D. Lee, K.-A. Elijah Jr

Molten pool characterization of laser lap welded copper and aluminum

J. Phys. D Appl. Phys., 46 (49) (2013), Article 495501 View PDF

CrossRefView Record in ScopusGoogle Scholar[19]

S. Zhao, G. Yu, X. He, Y. Zhang, W. Ning

Numerical simulation and experimental investigation of laser overlap welding of Ti6Al4V and 42CrMo

J. Mater. Process. Technol., 211 (3) (2011), pp. 530-537

ArticleDownload PDFView Record in ScopusGoogle Scholar[20]

W. Huang, H. Wang, T. Rinker, W. Tan

Investigation of metal mixing in laser keyhole welding of dissimilar metals

Mater. Des., 195 (2020), Article 109056

ArticleDownload PDFView Record in ScopusGoogle Scholar[21]

E. Kaiser, G. Ambrosy, E. Papastathopoulos

Welding strategies for joining copper and aluminum by fast oscillating, high quality laser beam

High-Power Laser Materials Processing: Applications, Diagnostics, and Systems IX, vol. 11273, International Society for Optics and Photonics (2020), p. 112730C

View Record in ScopusGoogle Scholar[22]

V. Dimatteo, A. Ascari, A. Fortunato

Continuous laser welding with spatial beam oscillation of dissimilar thin sheet materials (Al-Cu and Cu-Al): Process optimization and characterization

J. Manuf. Process., 44 (2019), pp. 158-165

ArticleDownload PDFView Record in ScopusGoogle Scholar[23]

V. Dimatteo, A. Ascari, E. Liverani, A. Fortunato

Experimental investigation on the effect of spot diameter on continuous-wave laser welding of copper and aluminum thin sheets for battery manufacturing

Opt. Laser Technol., 145 (2022), Article 107495

ArticleDownload PDFView Record in ScopusGoogle Scholar[24]

D. Wu, X. Hua, F. Li, L. Huang

Understanding of spatter formation in fiber laser welding of 5083 aluminum alloy

Int. J. Heat Mass Transf., 113 (2017), pp. 730-740

ArticleDownload PDFView Record in ScopusGoogle Scholar[25]

R. Ducharme, K. Williams, P. Kapadia, J. Dowden, B. Steen, M. Glowacki

The laser welding of thin metal sheets: an integrated keyhole and weld pool model with supporting experiments

J. Phys. D Appl. Phys., 27 (8) (1994), p. 1619 View PDF

CrossRefView Record in ScopusGoogle Scholar[26]

C.W. Hirt, B.D. Nichols

Volume of fluid (VOF) method for the dynamics of free boundaries

J. Comput. Phys., 39 (1) (1981), pp. 201-225

ArticleDownload PDFGoogle Scholar[27]

W. Piekarska, M. Kubiak

Three-dimensional model for numerical analysis of thermal phenomena in laser–arc hybrid welding process

Int. J. Heat Mass Transf., 54 (23–24) (2011), pp. 4966-4974

ArticleDownload PDFView Record in ScopusGoogle Scholar[28]J. Zhou, H.-L. Tsai, and P.-C. Wang, “Transport phenomena and keyhole dynamics during pulsed laser welding,” 2006.

Google Scholar[29]

D. Harrison, D. Yan, S. Blairs

The surface tension of liquid copper

J. Chem. Thermodyn., 9 (12) (1977), pp. 1111-1119

ArticleDownload PDFView Record in ScopusGoogle Scholar[30]

M. Leitner, T. Leitner, A. Schmon, K. Aziz, G. Pottlacher

Thermophysical properties of liquid aluminum

Metall. Mater. Trans. A, 48 (6) (2017), pp. 3036-3045 View PDF

This article is free to access.

CrossRefView Record in ScopusGoogle Scholar[31]

H.-C. Tran, Y.-L. Lo

Systematic approach for determining optimal processing parameters to produce parts with high density in selective laser melting process

Int. J. Adv. Manuf. Technol., 105 (10) (2019), pp. 4443-4460 View PDF

CrossRefView Record in ScopusGoogle Scholar[32]A. Ascari, A. Fortunato, E. Liverani, and A. Lutey, “Application of different pulsed laser sources to dissimilar welding of Cu and Al alloys,” in Proceedings of Lasers in Manufacturing Conference (LIM), 2019.

Google Scholar[33]

A. Fortunato, A. Ascari

Laser welding of thin copper and aluminum sheets: feasibility and challenges in continuous-wave welding of dissimilar metals

Lasers in Manufacturing and Materials Processing, 6 (2) (2019), pp. 136-157 View PDF

CrossRefView Record in ScopusGoogle Scholar[34]

A. Boucherit, M.-N. Avettand-Fènoël, R. Taillard

Effect of a Zn interlayer on dissimilar FSSW of Al and Cu

Mater. Des., 124 (2017), pp. 87-99

ArticleDownload PDFView Record in ScopusGoogle Scholar[35]

N. Kumar, I. Masters, A. Das

In-depth evaluation of laser-welded similar and dissimilar material tab-to-busbar electrical interconnects for electric vehicle battery pack

J. Manuf. Process., 70 (2021), pp. 78-96

ArticleDownload PDFView Record in ScopusGoogle Scholar[36]

M. Abbasi, A.K. Taheri, M. Salehi

Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process

J. Alloy. Compd., 319 (1–2) (2001), pp. 233-241

ArticleDownload PDFGoogle Scholar[37]

D. Zuo, S. Hu, J. Shen, Z. Xue

Intermediate layer characterization and fracture behavior of laser-welded copper/aluminum metal joints

Mater. Des., 58 (2014), pp. 357-362

ArticleDownload PDFView Record in ScopusGoogle Scholar[38]

S. Yan, Y. Shi

Influence of Ni interlayer on microstructure and mechanical properties of laser welded joint of Al/Cu bimetal

J. Manuf. Process., 59 (2020), pp. 343-354

ArticleDownload PDFView Record in ScopusGoogle Scholar[39]

S. Yan, Y. Shi

Influence of laser power on microstructure and mechanical property of laser-welded Al/Cu dissimilar lap joints

J. Manuf. Process., 45 (2019), pp. 312-321

ArticleDownload PDFView Record in ScopusGoogle Scholar