FLOW-3D/MP v6.1

FLOW-3D/MP v6.1 는 최신 버전인 FLOW-3D version 11.1과 동일합니다. Active simulation control, batch post processing, report generation 기능을 포함합니다. FLOW-3D/MP 사용자들은 FLOW-3D 의 복잡한 물리적인 수치 뿐아니라, 솔버 옵션들의 정확성을 이용할 수 있지만, 성능 면에서는 엄청나게 향상시킬 수 있습니다. 소프트웨어의 일반적인 응용 프로그램에 대한 벤치 마크 성능 결과를 보려면 여기로 이동하시기 바랍니다.
NYPA models the Niagra project with FLOW-3D/MP

A large scale modeling study: New York Power Authority used FLOW-3D/MP for their Niagara Hydro Power Project – Modeling and Flow Simulation in order to cut their runtime by a factor of 3.5. Image courtesy NYPA.

Models

FLOW-3D/MP v6.1 의 사용자 인터페이스와 물리 모델들은 FLOW-3D v11.1.을 바탕으로 제작되었습니다. Learn what’s new >

Results Analysis

포스트 프로세서인 FlowSight로 해석 결과를 편리하고 자세히 보실 수 있습니다. 세계적으로 유명한 포스트 프로세서인 EnSight® 를 기반으로 FLOW-3D 에 최적화되어 고급스러운 시각화 분석이 가능합니다. FlowSight 는 사용자들에게 새롭고 강력한 분석 방법, 시각화, 시뮬레이션 데이터와 소통할 수 있는 방법을 제공합니다. Learn more about the power of FlowSight >

User Interface Changes

사용자는 인터페이스의 MPI 탭에서 별도의 decomposition 단계 없이 사용하실 수 있도록 재설계되었습니다. GUI의 작업 스케줄러를 통한 시뮬레이션 실행은 스케줄러가 독립적으로 만들어졌습니다.

What’s Inside

  • Parallelization is based on the hybrid MPI-OpenMP technology.
  • Automatic Decomposition Tool (ADT) is used for domain decomposition. ADT has directional decomposition and works with nested and partially overlapping mesh blocks.
  • Dynamic thread balancing enables load distribution across MPI processes during simulation.
  • Memory management has been optimized in the pre-processor and the benefits can be seen especially in large simulations.

Remote Solving

FLOW-3D/MP 고객들은 클라이언트-서버 기술을 사용하여 원격 클러스터에 원격 해석을 실행할 수 있습니다. 이 추가 기능은 고객이 하드웨어 리소스들을 쉽게 모두 사용 가능하게 하고, 간단하고 생산적인 방법으로 시뮬레이션이 가능하도록 합니다.

Customization

사용자가 커스터마이징 하기 위해서는 Intel® Fortran 13.1 compiler 와 Intel® MPI 5.0 library가 필요합니다.